X2Power SLC10004A, Инструкция по эксплуатации

Страница: 3 / 16

3. Do not expose charger to rain, snow
or moisture.
4. Operate charger only in well-ventilated areas.
Batteries generate explosive gases during
normal operation.
5. Wear eye protection when operating charger.
6. Never use an extension cord or any
attachment not recommended by
manufacturer, otherwise this may result in a
risk of fire, electric shock or personal injury.
7. It is recommended that you periodically
check the battery charger while charging.
8. To reduce risk of damage to electric plug
and cord, pull by the plug rather than cord
when disconnecting charger.
9. Do not attempt to charge damaged or
frozen batteries.
10. Do not operate the charger if the cord or
plug has been damaged or if the charger
has been subjected to shock or damage.
Take it to a qualified technician for repair.
11. Do not disassemble the charger. Incorrect
reassembly may result in a risk of electric
shock or fire.
12. Unplug the charger from power source before
attempting any maintenance or cleaning. Use
lint-free cloth to clean the surface, do not
immerse into water.
13. This charger is not intended for use by
children or persons with reduced physical,
sensory or mental capabilities, or lack of ex-
perience and knowledge without supervision.
14. WARNING - RISK OF EXPLOSIVE GASES
WORKING IN VICINITY OF A LEAD-ACID
BATTERY IS DANGEROUS. BATTERIES
GENERATE EXPLOSIVE GASES DURING
NORMAL BATTERY OPERATION. FOR
THIS REASON, IT IS OF UTMOST
IMPORTANCE THAT YOU FOLLOW THE
INSTRUCTIONS EACH TIME YOU USE
THE CHARGER. To reduce risk of battery
explosion, follow these instructions and
those published by the battery manufacturer