39
38
W
ARRANTY
24 MONTH LIMITED WARRANTY
X-10 PRO (X-10) WARRANTS ITS PRODUCTS TO BE
FREE FROM DEFECTIVE MATERIAL AND
WORKMANSHIP FOR A PERIOD OF TWO (2)
YEARS FROM THE ORIGINAL DATE OF
PURCHASE AT RETAIL. X-10 AGREES TO REPAIR
OR REPLACE, AT ITS SOLE DISCRETION, A
DEFECTIVE X-10 PRODUCT IF RETURNED TO X-10
WITHIN THE WARRANTY PERIOD AND WITH
PROOF OF PURCHASE.
IF SERVICE IS REQUIRED UNDER THIS
WARRANTY:
1.
RETURN THE DEFECTIVE UNIT POSTAGE
PREPAID TO YOUR DEALER.
2.
ENCLOSE A DATED PROOF OF PURCHASE.
3.
X-10 IS NOT RESPONSIBLE FOR SHIPPING
DAMAGE. UNITS TO BE RETURNED SHOULD
BE PACKED CAREFULLY.
THIS WARRANTY DOES NOT EXTEND TO ANY X-
10 PRODUCTS WHICH HAVE BEEN SUBJECT TO
MISUSE, NEGLECT, ACCIDENT, INCORRECT
WIRING OR TO USE IN VIOLATION OF OPERATING
INSTRUCTIONS FURNISHED BY US, NOR
EXTEND TO ANY UNITS ALTERED OR REPAIRED
FOR WARRANTY DEFECT BY ANYONE OTHER
THAN X-10. THIS WARRANTY DOES NOT COVER
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
AND IS IN LIEU OF ALL OTHER WARRANTIES
EXPRESSED OR IMPLIED AND NO
REPRESENTATIVE OR PERSON IS AUTHORIZED
TO ASSUME FOR US ANY OTHER LIABILITY IN
CONNECTION WITH THE SALE OF OUR
PRODUCTS.
SOME STATES DO NOT ALLOW LIMITATIONS ON
HOW LONG AN IMPLIED WARRANTY LASTS, AND/
OR THE EXCLUSION OR LIMITATION OF
INCIDENTAL OR CONSEQUENTIAL DAMAGES SO
THE ABOVE LIMITATIONS AND EXCLUSIONS MAY
NOT APPLY TO THE ORIGINAL CUSTOMER. THIS
WARRANTY GIVES YOU SPECIFIC RIGHTS AND
YOU MAY ALSO HAVE OTHER RIGHTS WHICH
VARY FROM STATE TO STATE.
T
ROUBLESHOOTING
The Transceiver Module doesn’t
The Transceiver Module doesn’t
respond to the remote:
respond to the remote:
• Check the House Code of the
Transceiver Module is set to A. If you
have changed the Housecode on the
remote (see p. 32), check that it
matches the Housecode on the
module.
• Press the ON/OFF button on the front
of the module to confirm it operates
the equipment connected to it.
The Transceiver Module works, but
The Transceiver Module works, but
other modules don’t respond:
other modules don’t respond:
• Check that the module has the same
Housecode as the Transceiver Module.
• Try plugging the module into a different
outlet.
The Remote won’t control your A/V
The Remote won’t control your A/V
equipment, or doesn’t work at all:
equipment, or doesn’t work at all:
• Use manual controls or the original
remote control to confirm the
equipment is working properly.
• Be sure you pressed the device key for
the device you want to control.
• Re-enter the code for your A/V
product from the code listings on
pages 15 through 24.
• Try searching for the code as
described on page 26.
• Replace the Remote’s batteries.
