29
28
L
EARNING
Your PUR08 Learning Remote has the
codes for most TVs, VCRs, etc. in its code
library. However, if the code for your
particular device is not found in the library,
you can learn these codes from your
existing remote. Or if you find a code from
the tables in this manual that “almost”
matches your device, but a few buttons are
missing, you can learn just those buttons.
1.
Point your existing
remote at the
Learning Remote
with a distance of
about 2 inches
between the
remotes.
2.
Press and hold
SETUP until the
LED indicator
lights steadily.
Release the Setup
button.
3.
Press the mode
button that
matches the
equipment you
want to learn. The
LED blinks once.
4.
Press and release
the LEARN button.
The LED blinks
once.
5.
Press and release
the button on the
Learning Remote
that you want to
teach. The LED
blinks once.
(Press shift first to
learn a shifted
function). See notes on pages 30 and
31.
S
ETTING
THE
S
LEEP
T
IMER
The Sleep Timer automatically turns off the
TV after the time you set. Press the TV
button, then follow the instructions below
to set the Sleep Timer:
1.
Press and hold
TIMER until the
LED indicator
lights steadily.
Release TIMER
button.
Note:
Note:
Make sure you leave the remote
pointing at the TV to ensure it turns off the
TV at the time you set.
2.
Use the number
buttons to enter
the sleep time
required
(1 to 99 minutes).
3.
Press ENTER to
confirm the setting.
