35
34
3.
Enter 014 to
control an IR Mini
Controller, 013 for
standard
X-10 PRO control.
The LED turns off
after the last digit
entered.
Note:
Note:
In most cases, you will not need to
use the IR Mini Controller to receive
commands from the Learning Remote - the
Transceiver Module does this for you and
has the added advantage of working
through walls. You can’t control the IR Mini
Controller and the Transceiver Module at
the same time.
Note:
Note:
The Housecode you choose must
match the Housecode on the Transceiver
Module you are using it with.
C
ONTROLLING
AN
IR M
INI
C
ONTROLLER
(IR543)
If you already own an IR Mini Controller,
you will need to change the X-10 PRO
Home Automation code in the remote to
use it. The code for standard X-10 PRO
Home Automation is 013. The code to
control the IR mini controller is 014. To
change the code:
2.
Press and hold
SETUP until the
LED indicator
lights steadily.
Release the Setup
button.
3.
Use the number
buttons to enter
the number
equivalent to the
chosen House
Code (1=A, 2=B
..16=P).
1.
Press and hold
SETUP until the
LED indicator
lights steadily.
Release the
SETUP button.
2.
Press and release
the X-10 button.
4.
Press the ENTER
button to confirm
the House Code.
The LED turns off.
