H Band (App)
37
SIONA XW FIT
Automatic pulse & blood pressure measurement:
Every 30 minutes, the clock generates an average value of the past pulse and blood pressure
measurements and enters this into the App H Band. You can find it on the start page of the app.
To get a current value of your heart rate, start a manual heart rate monitor. See the section „
H
Band (App)
“ – „
Manual pulse and blood pressure measurement
“ (p.17)
The collected measurements are for personal use only and do not replace a medical
device or a doctor.
Manual pulse & blood pressure measurement:
There are two ways to start the manual pulse measurement. On the one hand, you can use the
Smart Button on the SIONA COLOR FIT itself to jump to the pulse function by repeatedly
pressing it. Now the watch measures the pulse. (Wait up to 30 sec.) On the other hand, you can
activate pulse measurement via the app by pressing the “more” button and then tapping purple
pulse button on the dashboard. Now press the start button so that the watch starts measuring the
pulse. The pulse is displayed on your device after a certain time. (
picture 7&8
)
There are also two ways to start manual blood pressure measurement. On the one hand, you can
use the Smart button on the SIONA COLOR FIT itself to jump to the blood pressure function by
repeatedly pressing it. Now the watch measures the blood pressure. (Wait up to 60 sec.) On the
other hand, you can activate the blood pressure measurement via the app by pressing the “more”
button and then tapping the orange blood pressure button on the dashboard. Now press the start
button so that the watch starts measuring the blood pressure. The blood pressure is displayed on
your device after a short time. (
picture 7&9
).
The collected measurements are for personal use only and do not replace a medical
device or a doctor.