- 6 -
8. When the hot air gun is not in use always place it back in the
vertical position in the upright tower holder. The hot air gun will
go into Auto Cool Down mode and continue blowing air until the
temperature gets back down to 100°C. Then the airflow will stop,
the displays will all show “---”, and the unit will be in Standby
mode.
Note:
When the hot air gun is initially returned to the vertical position
in the upright tower holder, the air flow may increase noticeably
while the hot air gun automatically goes into Auto Cool Down/
Standby mode. This allows the hot air gun to cool down quickly
and efficiently. This is a safety feature built into the unit.
9. When the hot air gun is removed again from the holder it will start
blowing air and ramp up to the programmed temperature and air
speed quickly.
10. When the work is completed, return the hot air gun to the vertical
position in the upright tower holder and let the unit fully cool down
with the Auto Cool Down/Standby function. Once the unit has gone
into Standby mode, the unit can be shut off.
Note: Do not shut off or unplug the unit the hot air gun has FULLY
cooled down and is in Standby Mode.
