Foot Platform
Seat
Platform
Flex
Arms
Cable
FIGURE 1a
READ THIS MANUAL IN ITS ENTIRETY PRIOR TO USING THIS PRODUCT.
8
This instruction manual complies with the ASTM F2123 - Standard Practice for Treestand Instructions.
ASSEMBLY INSTRUCTIONS
- X-1 MINI -
FIGURE 1
STEP 1.
Install the flex arms onto the foot platform using one (1) 1/4” x 1” allen head
bolt{A}, one (1) washer {C} and one (1) nylock nut per flex arm (Fig 1).
NOTE:
The
ends of the flex arms with the round eyes should be placed upright and the arm
loops should face outwards. Repeat this step for both foot platform flex arms.
STEP 2.
Locate the seating platform and the remaining two (2) flex arms. Install the
flex arms onto the seat platform using one (1) 1/4” x 1” allen head bolt {A}, one (1)
washer {C} and one (1) nylock nut per flex arm (Fig 1).
NOTE:
The ends of the flex
arms with the round eyes should be upright and facing outward. Repeat this step
for both standing platform flex arms.
NOTE:
Top (seat) section of your
platform should be assembled
with cable adjusters pointing
down and the bark biter on the
lower portion of the frame.
