5.
If you want to connect more units, simply repeat step 4.Up to 24 alarms can be interconnected this way.
To ensure
that all alarms enter the same interlinked network, make sure you only work with 2 units at a time—one unit
enters the pairing mode and the other unit enters the searching mode.
6.
Test the alarms according to the steps in the section “Alarm Test”.
Quickly press 4 times
Quickly press twice
RF
Hold down
NOTES
1.
The alarm will enter the searching mode or the pairing mode for 60 seconds with the red LED flashing. After 60
seconds, repeat step 2 to connect the alarms. If needed, press the TEST/HUSH button once while the alarm is in
the searching mode or the pairing mode, and the red LED will stop flashing and the alarm will quit the pairing
mode to enter normal status.
2.
Test all wireless alarms to ensure they are interconnected before installation.
3.
A maximum of 24 wireless alarms can be interconnected on the same network.
4.
The model can only be interconnected with other X-Sense Link
+
wireless interlinked alarms.
