P P G D I G I M A T C H
S P E C T R O P H O T O M E T E R
15
N (measurement number) Option
This option is used to set the default number of measurements required. It is recommended that the
number be set to 5 or a minimum of 3.
Device Settings
Wi-Fi Setup
This option is used to turn Wi-Fi on/off and setup the selected Wi-Fi network.
Off:
When set to off
,
Wi-Fi is turned off (saving battery power).
On:
When set to on
,
Wi-Fi is turned on during normal operation. Wi-Fi is turned off during deep sleep
mode.
When set to On
,
the device scans for available network. After scanning the available networks are displayed on
the screen. Tap a desired network and setup the password if required. When finished, tap
Connect
to select the
Wi-Fi network.
Forget Network:
Tap a setup network and tap
Forget
to clear the Wi-Fi name, password and security.
Speaker Option
This option is used to turn the device speaker on or off. When set to on, the device beeps when the
screen is tapped, after a measurement, and after a calibration.
Display Option
This option is used to adjust the LCD sleep time and display brightness. The LCD sleep time can be
turned off or adjusted from 10 to 600 seconds by sliding the control from left to right. Once the LCD screen is
asleep, simply tap the screen to activate it. The screen brightness can also be adjusted by sliding the control left
or right.
Battery Saver Option
This option is used to adjust the Standby time and power off time to conserve battery power. The
Standby time is used to set the time before the device goes to sleep mode to help preserve battery life. Tapping
the screen will reactivate the device. The option can be set from 0 to 60 minutes in 5 minute increments or turned
off. The Power off setting is used to set the time before the device shuts down to help preserve battery life.
Pressing the measure and power on/off button reactivates the device. The option can be set from 0 to 300
minutes in 5 minute increments.
