X-Rite BASF 12/6, Руководство пользователя

Страница: 24 / 35

B A S F S P E C T R O P H O T O M E T E R 1 2 / 6
22
4.
Hold the instrument steady and press a Measure button or tap the screen (2) to initiate a measurement (or
automatically when this option is selected in settings). Continue to hold the instrument steady until
“Calculating” appears in the screen.
NOTES :
• If an error occurs after the measurement, tap
OK
on the screen and try measuring again.
•
The current job can be deleted at any time by tapping the Cancel icon at the top left of the screen
and then tapping Delete .
The bottom of the screen now shows the first measurement as completed and asks you to take the second
measurement. If SMC is activated, the screen shows the current number of measurements averaged so far.
OR
5.
Position the instrument on the second sample area as previously explained. Hold the instrument steady and
press a Measure button or tap the screen.
6.
Continue with the remaining sample area measurements to complete the job.
7.
After the last measurement for the job is completed, the summary screen appears for the job. Refer to the
sections that follow for information on viewing data, entering tags (job names and car information), and
deleting individual sample measurements.
NOTE: Tag information can only be entered if the job was created on the instrument and not downloaded
from the software.
8.
When completed with viewing and adding tag information (if applicable), tap the checkmark icon of the
Summary screen to save the job and return to the main job screen.
9.
Terminate
When SMC is used as the measurement method, it is possible after 5 readings or more to terminate the job.
This is accomplished by tapping Terminate and selecting one of the three options:
•
Store Average
of readings already done.
•
Restart Job without saving.
•
Cancel (terminate) and continue with SMC.
10.
Temperature
When the temperature of the panel is lower or higher than the limit, a warning message is displayed to
inform the user. It is recommended to keep the panel around 20°C as temperature could have influence on
the color measurement.