background image

Rev.081022 

Page 6 of 22 

FUS-20852000-0031 

 

  Disconnect battery cables before working near the rope, drum, fairlead or load to prevent 

accidental starting. 

  Keep rope straight to avoid kinking the rope. 

  Keep children and bystanders away while operating. 

  Hook onto the object using a pulling point, tow strap, or chain. Do not wrap the rope around the 

object and hook onto the rope itself.  

  Do not use a recovery strap while winching. 

  Secure the load after moving. Do not lock the mechanism. 

  Keep at least five (5) full wraps of rope on the winch drum. 

  Keep clear of the rope, hook, and load while winching. Do not step over the rope or apply 

pressure to the rope under tension. The rope might break and cause personal injury.  

  If the rope begins to get entangled, stop the winch immediately and release the rope using the 

switch. 

  Only winch with the winching vehicle’s transmission placed in neutral. Winching with a vehicle’s 

transmission in gear or park may damage the transmission. A vehicle’s transmission is not 
designed to handle this type of load. 

  Do not operate the winch on extreme slopes. Do not exceed 45° from center line of vehicle for a 

roller fairlead. For a Hawse fairlead, the angle should be as close to vehicle center line as 
possible. 

  People with pacemakers should consult their physicians before use. Electromagnetic fields near 

heart pacemaker could cause pacemaker interference or failure. 

  Remove all obstacles before operation. 

  Always use supplied hook strap whenever spooling winch rope in or out, during installation, and 

during operation. 

  Always take time to use appropriate rigging techniques for winch pull. 

 

Intended Use 

 

This electric winch is intended for vehicle recovery.  It is intended only for consumer use and not intended 
for commercial use.  Always operate this winch within the specified duty cycle with extreme caution.  Read 
all Warnings and Cautions before operation of this winch and keep bystanders away from winch and 
vehicles being used during winching activity. 

 

 

 

 

 

 

 

 

 

 

 

Содержание XP40























Отзывы: