X-POWER XP40, Руководство пользователя

Страница: 15 / 22

Rev.081022 Page 15 of 22 FUS-20852000-0031
10. Place a heavy cloth (such as a jacket) or Damper
(sold separately) over the rope span to help absorb
the force released if the rope breaks.
11. Re-engage the clutch by moving the clutch handle to
the engaged position (see image below).
⚠
WARNING
Do not allow anyone to stand near the rope or in line with the rope behind the winch while it is under
power. If the rope should slip or break, it can suddenly whip back towards the winch, causing a
hazard for anyone in the area. Stand far to the side while winching.
12. Attach the corded Remote Control to the Remote
Socket if this will be used to control the winch.
Activate the wireless Remote Control by pressing
and holding the wireless button if your winch is
equipped with this type of remote and it will be used.
13. Operate the winch controls briefly to ensure they
work properly. If operation is reversed, the power
cables may be connected backwards. Correct any
such issue before use.
⚠
WARNING
Only operate the winch while the winch, line, and load are in view. Make sure that there are no
bystanders nearby.
14. When it is safe to do so, use the power switch to
retract the rope, and winch the item as desired. Make
sure the vehicle or object is safely secured before
disconnecting the winch rope from item. Power-Out
winch rope a short distance to release rope tension
and create slack as needed to free winch hook from
item.
15. Do not power the hook all the way into the fairlead.
Stop Power-In periodically when respooling winch
rope to make sure rope is neatly wrapped on winch
drum. Jog or briefly power the hook to the fairlead
when it is close to the fairlead to prevent damage.
Hook should only have light pressure on fairlead.
ENGAGE
Power‐Out
Power‐In
NOTE:
Make sure the clutch is fully engaged. Pull on Hook Strap to
create small force in the winch rope. Small force should
reengage the clutch if it is in a blocked shift position.