ENGLISH
APPLICATION
PRESSURE BOOSTER
LANGUAGE
ENGLISH V1.3
APPLICATION
PRESSURE BOOSTER
LANGUAGE
ENGLISH V1.3
LANGUE
FRANCAISE V1.3
LINGUA
ITALIANO V1.3
PRESSING IT YOU WILL SEE THE REMAINING PART
OF THE PARAMETERS THAT CAN BE SET
ACCORDING TO THE APPLICATION CHOSEN:
PRESS. BOOSTER = SEE CHAPTER 5.2
CLEAN WATER = SEE CHAPTER 5.3
SEWAGE = SEE CHAPTER 5.4
4-20mA bar = SEE CHAPTER 5.5
4-20mA meters = SEE CHAPTER 5.6
}
SETUP PREMI
PAG + MAN 10s
+
MOT. 1 AUTO-LEAR.
ENTER TO START
5.1 Fast programming
5. PROGRAMMING
ON
NO LOAD
MOT. 1 AUTO-LEAR.
13.2 A 0%
MOT. 2 AUTO-LEAR.
13.2A 0 %
MOT. 1 AUTO-LEAR.
COMPLETED
IN THIS STAGE THE MOTHERBOARD STARTS FOR
APPROXIMATELY 30s THE MOTOR RECORDING THE
PARAMETERS AUTOMATICALLY
THE MOTHERBOARD HAS CORRECTLY PERFORMED
THE AUTO-LEARNING PROCEDURE
27
APPLICATION
SEWAGE
APPLICATION
CLEAN WATER
APPLICATION
4-20mA bar
APPLICATION
4-20mA meters
MOT. 2 AUTO-LEAR.
COMPLETED
MOT. 2 AUTO-LEAR.
ENTER TO START
PRESSING IT FOR MORE THAN 1s YOU GO OUT
OF THE SETUP AND THE PARAMETERS
ARE STORED IN THE MEMORY
POSSIBLE ANOMALIES DURING THE AUTO-LEARNING PHASE
THE MOTHERBOARD
DOES NOT DETECT
ANY CONNECTED
MOTOR
THE ABSORBED
CURRENT EXCEEDS
THE MAXIMUM
ALLOWED THRESHOLD
MAXIMUM CURRENT
> -- A
It is used to scroll forward through the setup pages
It is used to increase the value of a parameter
It is used to scroll back through the setup pages
It is used to reduce the value of a parameter
Pressed it allows to enter the selected parameter
Pressed confirms the set value
Pressed it exits the parameter
IGNITION
CONTROL PANEL
