X-PERFORMER XPDCB40LIBL-2B, Оригинальное руководство пользователя

Страница: 25 / 54

25
Compliance with the
essential requirements of
the European directives
applicable to the product
ADDITIONAL SAFETY WARNINGS
FOR BRUSH CUTTERS
General instructions
Do not allow persons unfamiliar with the brush
cutter/string trimmer or these instructions to operate
the tool. Brush cutter and string trimmers are
dangerous in the hands of untrained users.
Be sure that anyone who is to operator the
brush cutter/string trimmer has first read the
instruction manual.
Never allow people unfamiliar with these
instruction, people(including children) with reduced
physical, sensory or mental capabilities, or lack of
experience and knowledge to use the tool. Local
regulations can restrict the age of the operator.
Use the tool with the utmost care and attention.
Operate the equipment only if you are in good
physical condition. Perform all work calmly and
carefully. Use common sense and keep in mind that
the operator or user is responsible for accidents or
hazards occurring to other people or their property.
Never use the equipment after consumption of
alcohol or drugs, or if feeling tired or ill.
Avoid Unintentional Starting. Do not carry
battery-installed equipment with finger on switch. Be
sure switch is off when installing a battery cartridge.
The motor is to be switched off immediately in
case that the equipment shows any problem or
abnormal sign.
Switch off and remove the battery cartridge
when resting and when leaving the equipment
unattended, and place it in a safe location to prevent
danger to others or damage to the equipment.
Don't force the equipment. it will do the job
better and with less likelihood of a risk of injury
at the rate for which it was designed.
Don't overreach. Keep proper footing and
balance at all times.
Check before starting
Always remove the battery to prevent the
machine being started by accident. Always
disconnect the battery before any maintenance on
the machine.
Before using the machine and after any impact,
check for signs of wear or damage and repair as
necessary.
Inspect the working area. Remove all loose
objects, such as stones, broken glass, nails,
steel wire, string, etc. that could be thrown out or
become wrapped around the cutter or cutter guard.
The machine operator must ensure that no
people or animals come closer than 15 meters
while working. When several operators are working
in the same area the safety distance should be at
least 15 meters.
Do an overall inspection of the machine before
use, see maintenance schedule.
Personal safety
The cutting tool does not stop immediately after
the machine is turned off.
The machine is only design for brush/trimmer .
Do not use the Brush cutter/grass trimmer
for any job except that for which it is intended.
Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result
in serious personal injury.
This appliance is not intended for use by
person (including children) with reduced physical,
sensory or mental capabilities, or lack of experience
and knowledge, unless they have been given
supervision or instruction concerning use of the
appliance by a person responsible for their safety.
Children should be supervised to ensure that they
do not play with the appliance.
Never allow children or other persons not
trained in the use of the machine and/or the battery
to use or service it. Local laws may regulate the age
of the user.
Store the equipment in a lockable area so that
it is out of reach of children and unauthorized
persons.
Keep hands and feet away from the cutting
area at all times and especially when switching
on the motor.
Dress properly. Do not wear loose clothing or
jewelry. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
Never use the machine if you are tired, if you
have drunk alcohol, or if you are taking medication
that could affect your vision, your judgement or your
co-ordination.
Turn off the machine when it has to be moved.
Always remove the battery when passing the
machine to another person.
Power tool use and care
The only accessories you can operate with this
product are the cutting attachment we recommend
in the technical data chapter.
Never use a machine that has been modified in
any way from its original specification.
Never use the machine near explosive or flammable
materials.
Never use a machine that is faulty. Carry out
the safety checks, maintenance and service
instructions described in this manual. Some
maintenance and service measures must be
carried out by trained and qualified specialists. See
instructions under the heading
Maintenance.
Only use original spare parts.
Always ensure that ventilation openings are
kept clear of debris.
All covers, guards and handles must be fitted
before starting.
Only use the machine in daylight or in other
well-lit conditions.