6
STROLLER UNFOLDING
To unfold a stroller, unfasten a locking block, and then unfold the stroller lifting the
handle up (a). Holding the stroller handle, fold it out to the upright position and push the
seat of the stroller down until the snaps lock (b).
WARNING: Before using the stroller, make sure that all folding mechanisms are locked.
STROLLER FOLDING
To fold the stroller, pull the handles on the handle bar (a). Holding the stroller handle
with one hand, fold it. Pull the seat block away with the other hand, folding it towards
the backrest (b). Continue folding, pulling the rear and front wheels closer (c, d) until the
locking block is locked (e).
SHOULDER STRAP FOR STROLLER TRANSPORT
To move the stroller frame, fasten the shoulder strap on the stroller frame using the clip hooks.
FRONT WHEEL LOCK
The stroller is equipped with swivel wheels. The slider shown in figures is used to lock
rotation. Press it down to lock the wheels to drive in a straight direction (a).
To unlock the wheel, move the slider up (b).
BRAKE
To lock the wheels, press the brake lever in its closer part (a).
To release the brake, press the brake lever in its distant part (b).
CANOPY ASSEMBLY
To mount the canopy, slide the stiffening bars into the mounting holes on both sides
of the canopy and press them down (a, b). Fasten the fastener located on the canopy
apron with the fastener on the seat. Then, wrap the stripes in the form of fasteners
around the ratchet of the canopy and fasten them together (c, d). Next, fasten the
fasteners located on the back of the backrest and those placed inside the canopy (e, f).
CANOPY DISASSEMBLY
To disassemble the canopy, unfasten the fasteners located on the back of the backrest
and those placed inside the canopy (a, b). Then unfasten the fasteners that clamp the
canopy apron with the fasteners on the seat (c). Then, unfasten the stripes in the form
of fasteners wrapped around the ratchet of the canopy (d). Next, slide the canopy stiffening
bars out of the mounting holes (e, f).
CANOPY FOLDING/UNFOLDING
To unfold the canopy, tighten the canopy stiffening bar until it is locked on both sides of the
ratchet (a).
To fold the canopy, pull the canopy stiffening bar until the locks are released (b).
INCREASING CANOPY SIZE
To enlarge the canopy with an additional wedge, open the zip located in the upper part
of the canopy (a). Then tighten the stiffening bar of the canopy until it is locked (b).
RECLINING SEAT ADJUSTMENT
To lower the seat, press the lock lever and move the seat down (a).
To lift the seat, grab the belt with one hand, and press the lock lever with other hand and
move the seat up (b).
FOOTREST ADJUSTMENT
To change the footrest position, press the buttons located on the footrest sides and
change its position.
1
2
3
4
5
6
7
8
9
10
11
ENGLISH
