X-IO Hyper ISE, Руководство пользователя

Страница: 86 / 178

Page 78 160337-000 Rev D, 30 September, 2013 Xiotech—Proprietary
ISE User Guide ISE Management
Web-Mgt, View Host Configuration
To view ISE host configurations, open the
Detailed Host Information
page as follows:
1. Select
Hosts
>>
summary
from the navigation bar on any Web-Mgt page and the
Host Summary
view
opens.
2. Expand the Host navigation tree in the left navigation pane.
3. Access the
Detailed Host Information
view by clicking the Host MAC ID in the expanded navigation tree
(ref. 1 in Figure 52) or the Host name in the Host Information view (ref. 2 in Figure 52).
When volume-host mappings exist, volumes mapped to the hosts are shown in the
Mapping
column of the
Host
Information
section.
The
Detailed Host Information
page is shown below in Figure 52.
Figure 52. Detailed Host Information
Orchestrator, Modify Host Configuration
To modify the ISE host configuration using the Orchestrator, select
All Devices
>>
ise_name
>>
Host View
>>
Host
. (See the
Orchestrator User Guide
.)
Web-Mgt, Modify Host Configuration
From the
Detailed Host Information
page (Figure 53), the following configuration changes can be made:
• Host name
• Operating system type
• Create or modify the WWID HBA ports for this host; see “Configuring Hosts” on page 60
• Create or modify a volume-host mapping scheme; see “Modify Volume–Host Mappings” on page 82
• Create or modify a comment
• Delete a host by highlighting a host and clicking
Delete
at the bottom of the page
Note.
A host with an active volume mapping cannot be deleted; mappings can be removed using the
Available Volumes
(see 1 below) and
Selected Volumes
(see 2 below) section of this view.