Operati
on manual X-O
NE -
UPDATE 2018
www.x-dreamfly.ch
Quality assurance
The X-dream Fly rescue devices go through a step by step control during the whole production. After every step,
the product is accurately checked and only after a successful pass of the test the following step will be started.
The fabric, the straps, lines and also the sewing machines are verified before use. Continuous quality controls of
the production process ensure an error-free production. Each rescue unit is subjected to a strict final inspection
before it leaves our factory.
Materials used
The materials used were selected very carefully and under the strictest quality standards. So we choose a 26g
uncoated rip-stop nylon fabric from UTT|Delcotex. This meets the required strengths, convinced by good work-
manship and promises a longer life.The main seams are including a webbing , which enhance the strength of the
canopy. The lines are made out of high-strength Dyneema for an enormous weight reduction. Only the middle lines
are made out of polyester. The connection of the lines to the canopy are also made out of polyester and corres-
ponds to the international parachute workmanship.
The components
The X-ONE consists of 4 components.
• The canopy
(cross-canopy)
• The suspension lines
(side and middle line)
• Main riser
• Innercontainer
Certification
The rescue device X-ONE 120 and X-ONE 160 by X-dream Fly are approved by the German airworthiness requi-
rement LTF. The X-ONE 90 is approved only by Shock-Loadtest. The approval is valid only in use with the original
X-dream Fly tube or 4-leaf Innercontainer. When using a X-ONE in the context of a non-original inner-container
please note the corresponding release note in the appendix of this manual.
Operational limits
X-ONE 120 and X-ONE 160
(LTF)
: Max. Service speed= 150km/h=41,6m/s. X-ONE 90: According to EN 12491 are
not suitable rescue equipment for use at speeds greater than 32m/s odder 115km/h.
Every 12 months the X-ONE rescue equipment need to aired and repackaged. It makes sense when you throw the
rescue package for training on this occasion in a clean, dry space. Currently, there is no verification requirement
for rescue equipment. However, we recommend every 24 months a review of the rescue system. After each case
of a real emergency opening the X-ONE rescue device should be checked by the manufacturer.
Permissible operating time: 12 years in compliance with the pack intervals and storage regulations. An extension
up to 15 years is possible after an inspection of the manufacturer.
page 8 of 32
