Operati
on manual X-O
NE -
UPDATE 2018
www.x-dreamfly.ch
picture 25
The cover sheet of the inner container should be
closed with the rubber at the end of the slot and
a final short line loop. The X-ONE is now ready for
installation into the harness. The connection of
the X-ONE to the harness shall be made due
following the recommendations of the harness
manufacturer
(harness manual)
.
The riser of the X-ONE should be connected to the
suspension point of the harness. For the connec-
tion of the handle there are three loops on the
outside face of the inner container.
page 24 of 32
