Operati
on manual X-O
NE -
UPDATE 2018
www.x-dreamfly.ch
page 28 of 32
picture 32
Fold the cover sheet No. 5 to the right, push the
black rubber through the eye of cover sheet
No. 5and push the plastik stick trough the
black rubber band.
picture 33
Then insert the plastic stick back through the
small hole in leaf No. 5 and fix the bracket of
the cover sheet No. 5 in the intended pocket
in sheet No. 4.
picture 34
The X- ONE is now ready for installation into
the harness or the external container. The
connection of the X-ONE to the harness shall
be made due following the recommendations
of the harness manufacturer
(Harness manual)
.
The riser of the X- ONE should be connected
to the suspension point of the harness. For the
connection of the handle thereare three loops
on the outside face of the inner container.
