XDS PRO1
Receiver User’s Guide
X-Digital Systems
Rev A - August 29, 2009
44
7.3
Changing the Relay Mappings
There are 16 different relays on the PRO1 receiver, and each of these relays can
correspond to a different netrelay for a radio broadcast. You can use the NMS to specify
the relay mapping for the receiver. To do this
x
Click Relay Mappings at the top of the page beneath the X-Digital Systems logo.
x
Click the “Edit” button in the
top right.
x
Edit the text for the corresponding relay you wish to change. To edit a cell, simply
click in it and it will expand automatically.
x
When done changing relays, pr
ess “Save”.
x
To cancel the changes you have made and to go back to the previous relay mapping,
click “Cancel”.
Note!
Netrelay
s entered into the NMS’s relay
-mappings text box bust be
upper-case alphanumeric, i.e. only upper-case letters, or
numbers.
7.4
Port Schedules
The PRO1 is capable of managing up to two different radio stations on the audio port. In
order to allow different stations to play on the same port, the receiver uses a port
scheduler.
Click the ‘Port Schedules’ from the top of the site or ‘Set my port schedules’
when first logging into the Affiliate site to access the port schedules:
x
To add a station to the scheduler, click anywhere in the column
labeled ‘Port A’
and a window will pop up allowing you to select what station, port and time to
add to the schedule.
x
The scheduler will do its best to approximate where it detects a click and set the
information in the window automatically but it may be necessary to make
adjustments.
x
To remove a st
ation from the scheduler, click the ‘X’ to the right of its label on
the scheduler.
x
When all desired stations have been added to the scheduler, click ‘Save’ to
commit the changes or ‘Cancel’ to return to the previous schedule.
x
To remove all stations from the scheduler and start with a blank slate, click the
‘Clear’ button.
