XDS PRO1
Receiver User’s Guide
X-Digital Systems
Rev A - August 29, 2009
21
4.2.6 The LOGS Command
This command deals with the receiver’s internal logs. There are three possible options to
be used with this command:
x
SHOW: This option will display the receivers log file to the console screen.
x
PURGE: This option will purge the receivers log and start over with a clean slate.
x
AUTO, [n]: This option will automatically log the status of the receiver every n
minutes
x
MSG,
“message”: This option will place a message in the log file with whatever text
is enclosed in the quotes of the argument of this command. The argument is required.
The LOGS command is only available to the tech profile.
4.2.7 The Login Command
This command will log the console into a user profile specified by the parameters. The
syntax is: LOGIN [username],[password]. The username and password must match for
the login to be successful. The two default argument combinations for the user and tech
profiles are “user,guest” and “tech,radio” respectively.
The Login command is available to all profiles.
4.2.8 The Logout Command
This command will log the console out of whichever user profile is currently logged in.
Remember to LOGOUT each time you are done using the console to change receiver
settings.
Note!
Logins from previous console sessions stay active until another
LOGIN command over-rides the past one or the LOGOUT
command is used. For security, LOGOUT when you are done with
the console.
The Logout command is available to all profiles.
4.2.9 The PASS command
The PASS command is used to display the Daily Password for the receiver which can
then be used to login to the Receiver Web Interface.
The PASS command is only available to the tech profile.
4.2.10 The PID command
The PID command is used to display or set the PID of the program playing through the
headphones. To show the PID, simply type the PID command without any arguments.
To change the program, Type PID xxxx, where xxxx is the PID of the desired program.
