XDS PRO1
Receiver User’s Guide
X-Digital Systems
Rev A - August 29, 2009
23
4.2.16 The SS Command
This command displays the current status of the receiver in the form a list of current
faults which are affecting the receiver. There are no options for this command. Below is a
table which will help to interpret the binary code given by the receiver:
Error Value
Error Name
Error Value
Error Name
0x00000001
FPGA Load Error
0x00010000
Recorder Overflow
0x00000002
DSP Load Error
0x00020000
Temperature Warning
0x00000004
DSP Ethernet Down
0x00040000
Temperature Critical
0x00000008
Storage Device Error
0x00080000
reserved
0x00000010
Tuner Not Locked
0x00100000
CF Needs Repair
0x00000020
reserved
0x00200000
reserved
0x00000040
reserved
0x00400000
File Delivery Fault
0x00000080
reserved
0x00800000
LNB
Over-current
0x00000100
I2C Failure
0x01000000
CF Offline
0x00000200
reserved
0x02000000
reserved
0x00000400
reserved
0x04000000 SDL
Ignored
0x00000800
reserved
0x08000000
URL Event Overflow
0x00001000
NV Config. Bad
0x10000000
Internet Down
0x00002000
reserved
0x20000000 Storage
Full
0x00004000
DSP Timeout
0x40000000
SW Download Ready
0x00008000
Fan Stopped
0x80000000
SW Download Error
Table 3. SS and SF Error Code Values
The SS command is available to all profiles.
4.2.17 The TIME Command
This command deals with displaying and setting the internal clock of the receiver.
Simply typing TIME without any option will display the time according to the receiver.
Time is synchronized automatically with the satellite. Your timezone may be set from
the Affiliate webpage.
The TIME command is available to all profiles.
4.2.18 The TUNER Command
This command is used to view and modify all of the receiver’s tuner settings. Typing this
command without any options will display a useful usage message. Type this command
followed by one of these options/argument combinations to view or modify tuner
settings:
Option Argument
Action
SHOW
Shows various technical data regarding the specified port.
SET ,[kHz],[sps]
Sets the tuners radio frequency to [kHz] and the tuner’s
symbol rate to [sps].
LNB ,[kHz]
Sets the tuner
’s LNB offset to [kHz].
