LASER DIFFUSER
13
Updating Firmware
To keep your XR-9500 unit up to date you will need to download the firmware.
Firmware can be downloaded from our website free of charge for all XR-9500 users.
You must first register your device at www.x-armour.com. Once registered, you will
receive e-mail notifications whenever updates are available.
After downloaded firmware at the USB memory drive from the website, plug the
USB memory into the ‘USB’ connector at the XR-9500 control unit. Just plug the
USB memory at the USB connector for downloading. The ‘USB’ at the control unit is
blinking red light 10 ~15 seconds during downloading firmware. When finishing the
downloading, the red light stops the blinking and turns on. Visit our website at www.
x-armour.com for further details.
One-Year Limited Warranty
PND Technology warrants your XR-9500 device against all defects in materials and
workmanship for a period of one(1) year from the date of the original purchase,
subject to the following terms and conditions.
☞
PND is not liable for any incidental or consequential damages arising from the
use or misuse of XR-9500. This warranty does not apply if the serial number has
been removed or if your XR-9500 device has been subjected to physical abuse or
modification or damaged with improper installation.
Please keep in mind snow and dirt on the lens will decrease the performance of
XR-9500. The lens must be kept clean.
USB memorry
Firmware
Updating Light
