LASER DIFFUSER
11
MODE) button for 4~5 seconds to change the modes. When engaged with laser
diffuser mode, the signal light shows red color. When engaged with parking assistant
mode, the signal light shows blue color.
☞
Some TPMS(tire pressure monitoring system) and remote smart key are using
433Mhz the same as XR-9500 wireless communication. The XR-9500 wireless circuit
is designed not to interfere with vehicle TPMS. When changing the mode, it might
have temporary error which means do not change the mode for a few seconds. You
may try it again. The control unit is updating current mode status automatically in
every second and change the receiver unit status if there is any error.
Laser Diffuser Mode Operation
When XR-9500 is in ‘Laser Diffuser Mode’, the indication shows red light. This mode
can recognize laser signal and communicate with other laser device. It can also
detect speed laser guns’ signal and it might be interfere it by trying to communication.
When you connect 2 sensors, you may install them at any of FR1, FR2 and FR3 at the
control box. You may install two sensors for compact vehicle.
However, when you
connect 3 sensors, please locate FR1 sensor at the center of vehicle. The FR2 and
FR3 can be installed any side location. Specially the FR1 can recognize any variants
laser signal, we recommend 3 sensor installations to protect from variable pulse
rate laser signals.
When XR-9500 detects any laser signal, it makes beep alarm and constant red light
blinking. It tries to communicate by transmitting laser signal so the police laser gun
might be interfered to read out the speed.
3PCS SENSORS(FR1 : CENTER)
2PCS SENSORS
2
1
