3
Technical Support: [email protected] US: +1 866 677 0053 EU: +44 (0) 1793 230 343
2. Features
FEA
TURES, SAFETY PRECAUTIONS AND P
ACKAGE CONTENTS
3. Safety Precautions
WARNING
To reduce the risk of fire, electric shock
or product damage:
4
Technical Support: [email protected] US: +866 677 0053 EU: +44 (0) 1793 230 343
FEA
TU
R
E
S AN
D SAFETY PR
E
C
A
UTI
ON
S
MX0404-QI
• Quick and easy installation – set up in seconds straight out of
the box.
• Simplified ports - Input: HDMI – Output: integrated RJ45
connectors for a single Cat5e/6/7 UTP cable to each display
point for ease of installation.
• Conforms to IEEE-568B standards
• Each HDMI port also supports DVI signals.
• Each Output port can be fed to multiple displays (cascaded).
• Enables up to 4 HDMI video/audio devices to be independently
switched through up to 4 HDMI displays or projectors for
uncompressed digital distribution.
• Each output able to show any connected source simultaneously
regardless of whether the input carries HDCP encryption.
• Refined for Custom Install and Home Theatre Installations.
• Reads and copies EDID from connected devices with additional
EDID configuration through customisable DIP switch settings if
necessary.
• 2k resolution supported.
• Fully 3D compatible – Frame sequential 3D (Blu-ray) and
interlaced stereoscopic 3D (satellite broadcasts etc.)
• Supports all high definition resolutions up to and including
1080p and standard video formats.
• RS232 port.
• Choose from 6 switching modes – infrared remote control, front
panel buttons, local IR, IR call-back, LAN and RS232.
• Simple switching remote control included, which can also be
learned into a universal remote handset to allow the control of
multiple devices from one handset.
• Fully compatible for integration with market leading control systems.
• 4 x IR 3.5mm mini-jack ports for each output to link IR from
control system to control display
• Additional infrared extension port for longer IR connections
• HDMI v.1.3
• Supports 24Bit Colour depth
• Signalling rate of 6.75 Gbps
• Pack comes complete with 1 x 4x4 Matrix with 19” rack
brackets, 4 x 40m IR receivers with mounting brackets, IR
receivers, emitters and a Matrix remote control handset.
Additional features included on the RX-1UTP-IR-40
• Transmits one-way signal together with the HDMI signal over a
single Cat5e/6/7 cable.
• Receivers capable of 1080p transmissions up to 40m (131ft)
under ideal conditions*
• For even greater control and fine tuning, each receiver features
a fully adjustable EQ distance range for optimising the
transmission signal.
2. Features
3. Safety Precautions
1. Do not expose this apparatus to rain, moisture, sprays,
drips or splashes and ensure that no objects containing
liquids are placed on the apparatus, including cups,
glasses and vases.
2. Do not place this unit in a confined space such as
enclosed shelving, cabinets or bookshelves. Ensure the
unit is adequately ventilated.
3. To prevent the risk of electric shock or fire hazard due to
overheating, do not cover the unit or obstruct ventilation
openings with material, newspaper, cardboard or
anything that may restrict airflow into the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as amplifiers or computers and do
not place near sources of naked flame.
5. Unplug apparatus from power supply during lightening
storms or when unused for long periods of time.
6. Protect the power cable from being walked on, pinched
or restricted in any way, especially at plug connections.
7. Only use attachments/accessories specified by the
manufacturer.
8. Units contain non-servicable parts - Refer all servicing to
qualified service personnel.
WARNING
To reduce the risk of fire, electric shock
or product damage:
• Protection against ESD (electrostatic discharge) included within
the unit to further stabilise transmission.
• LED indications for clear power and video signal selection.
• 5v mains supply included but receivers may be powered through the
USB port of the display using Wyrestorm USB to 5v power adaptor)
• Fully cascadable to further lengthen transmission.
*NOTE: ideal conditions denote cable run is within
specified distance range of product, no electrical
interference, the use of straight cable runs with no bends
or kinks and no patch panels or wall outlets used. Please
be advised that the presence of any of these factors in
your installation may compromise bandwidth and signal
strength. For longer transmission distances, RS232 control
and Ethernet pass-through, please see our full HDBaseT
or HDBT Lite range of matrices, transmitters, receivers and
extender sets.
USB to 5V Cable
Part Number
CAB-USB-5V
• Display Receivers capable of 1080p HD video
@60Hz and HD multichannel audio transmissions up to
70m/230ft under perfect conditions*
• Low profile chassis of 15mm / 0.59” for easier, more
convenient installations behind screens at display zones.
• Transmits discrete wide-band two-way IR control signal
together within the HDMI signal over a single Cat5e/6.
• Robust Class B HDBaseT transmission technology
for more affordable HD distribution and control whilst
retaining the trademark HDBaseT stability and resistance
to electrostatic and environmental interference compared
to conventional UTP transmission.
• Supports all high definition resolutions: 1080p, 1080i,
720p with screen refresh rates of 24Hz, 30Hz, 50Hz and
60Hz.
• HDMI v1.4 with full 3D compatibility with frame packing/
sequential (Blu-Ray) and interlaced stereoscopic (satellite/
cable broadcasts)
• Switchable RS232 for firmware update. Supports serial
control via RS232 if connected to a compatible HDBaseT
transmission device with routable RS232.
Check website for compatibility.
• Receivers cascadable up to 7 times within a single
output zone (7 x 70m/230ft) using another Class B
HDBaseT transmission device.
• Fully supports 3D applications (frame-packing/
sequential – Blu-ray and Interlaced Stereoscopic –
Satellite/cable broadcasts)
• Supports 36bit Deep Colour
• Cable termination follows IEEE-568B standards
• HDCP compliant
• Automatically adjusts feedback, equalization and
amplification of signal for easy installation.
• Threaded bushings on receivers allow use of both
standard and locking DC power plugs
• LED indication for visual power supply to receiver,
signal status to show established connection to display,
HDBaseT link to matrix and HDCP confirmation to
illustrate the presence of encryption within a signal
*Perfect transmission conditions - cable run within
specified distance range of product, no electrical
interference, the use of straight cable runs with no
bends or kinks and no patch panels or wall outlets
used. Please be advised that the presence of any of
these factors in your installation may compromise
bandwidth and signal strength.
For longer transmission distance, Ethernet pass- through,
to enable devices with 4k resolution or for 48bit Deep
Colour compatibility, please see our range of full HDBaseT
receivers and extender sets.
1. Do not expose this apparatus to rain, moisture,
sprays, drips or splashes and ensure that no
objects containing liquids are placed on the
apparatus, including cups, glasses and vases.
2. Do not place this unit in a confined space such as
enclosed shelving, cabinets or bookshelves.
Ensure the unit is adequately ventilated.
3. To prevent the risk of electric shock or fire hazard
due to overheating, do not cover the unit or
obstruct ventilation openings with material,
newspaper, cardboard or anything that may restrict
airflow into the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as amplifiers or computers and
do not place near sources of naked flame.
5. Unplug apparatus from power supply during
lightening storms or when unused for long periods
of time.
6. Protect the power cable from being walked on,
pinched or restricted in any way, especially at plug
connections.
7. Only use attachments/accessories specified by the
manufacturer.
8. Units contain non-servicable parts - Refer all
servicing to qualified service personnel.
1 x WyreStorm RX-70-PP Display Receiver
1 x Printed quickstart guide*
1 x Receiver mounting brackets (pair)
1 x 12V/1.5A DC power supply
1 x Wide-band IR TX Emitter
1 x Wide-band IR RX Receiver (30-50KHz)
1 x 3.5mm Phoenix male Connector (3 pin)
*Quickstart and full manual downloadable from product
page at
www.wyrestorm.com
4. Package Contents
