11
Technical Support: [email protected] US: +1 866 677 0053 EU: +44 (0) 1793 230 343
NHD-IP-CTL BROWSER CONFIGURA
TION & CONTROL
i. Matrix Switching Commands
Tabs at the top of the Home Screen page are used to access settings for Matrix, TX/RX Settings and System Settings.
All pages display Telnet API boxes where commands can be entered from the NetworkHD API.
Click the Load Matrix button, and the table of devices will appear with TX units across the top and the RX down
the left hand side.
Press the box that links each TX & RX to test switching of the video to each RX. Devices who’s names starts with
EX131 are transmitters where as devices that start EX141 are receivers
Attention
To remove unwanted TX or RX units from the matrix either reset the device or use the API
command:
config set device remove
name (name is the alias or the device number). Please note resetting
the device will clear the alias names of all devices on the CTL.
Device
online
Device
offline
A
green bar
represents corresponding TX
and RX are
connected.
Clicking the green bar changes colour to
clear
to signify the corresponding TX and
RX are
disconnected.
A
red bar
denotes TX/RX connection is
being processed
A clear bar signifies corresponding TX and
RX are not connected. Click to connect.
1
2
