5
US/CAN/MEX: +1-518-289-1294 Toll Free Technical Support: +1-844-280-WYRE (9973)
6. Front Panel Description
FRONT AND REAR P
ANEL DESCRIPTION
1
1
5
4
4
8
9
2
2
6
5
6
3
3
7
Dimensions (W x H x D) 440mm × 42mm × 204mm / 17.3’’ × 1.7’’ × 8’’
Mass (Main unit)
2.3kg / 5.0Ibs
Rack Space Required
1U
Certification
CE, FCC, RoHS
General
Power switch - turns device ON/Off
LED input/output select screen - Displays matrix
switching status for each connected input/output
IR receive window - Receives control signals from IR
control handset (accepts commands for this model
matrix only)
Input select buttons (UP/DOWN) - Selects input source
by pressing up/down selection - Press ENTER to confirm
selection
Output select buttons (left/right) - Selects output using
the left /right selection button - Press ENTER to confirm
selection
Enter - Press to confirm input/output selection
Note: Input or Output selection will not be made
unless Enter is pressed to confirm.
2
3
4
5
6
1
2
3
4
5
6
7
9
8
1
RS485 port - Connects to a RS485 device, such as a
PC or control system device, with a RJ45 to RS485
converter and a serial cable for matrix control.
LAN port - RJ45 port connects to an active IP network
for control of matrix via LAN (Telnet).
RS232 port - Connect to a RS232 device, such as a
PC or control system device, with the supplied USB to
UART cable or a direct serial cable for matrix control or
to upgrade matrix firmware.
HDMI IN - Inputs 1~8 (left to right) connect to local
HDMI source devices with HDMI 1.4 cables or DVI to
HDMI cables.
S/PDIF Optical / Coaxial Audio OUT 1~8 - Connects to
digital or analogue output audio system
HDMI OUT - 1~8 (left to right) - Connects to local HDMI
display devices with HDMI or DVI to HDMI cables.
EDID DIP Switch - Manual DIP setting for EDID
management of matrix for improved device connection
compatibility. (See EDID section for settings)
IR EXT - Connects to a supplied IR receiver for IR signal
reception to locally control the matrix.
Power - 12V 5A DC power supply input
7. Rear Panel Description