12
Technical support: [email protected] EMEA/ROW: +44 (0) 1793 230 343
RS232 CONTROL
Once the reading process is complete, the output
port EDID will appear in the table below.
Next, select an input port in the same Port Select
area - such as input port 2 in this case - and click Write to
save the current EDID to the selected input port.
Wait a few seconds for the process to complete.
Once the writing process is complete, click Save as
to save the EDID as a bin file.
To write previously saved output port EDID in bin
format, click Open File and choose the relevant bin
file before selecting an input port and click Write. It is
recommended this is done often if specific output EDID
from particular display devices are frequently used.
Configuring Advanced Settings
Advanced matrix settings can be configured by clicking
SETTING in the Set Panel Area.
vi. Audio Processor Control
The MX-0808-4K features enhanced audio capabilities,
including ARC (Audio Return Channel) and the capacity
to extract optical and coaxial S/PDIF Digital Audio output
from HDMI transmissions. Audio processing software is
also included for the adjustment of individual source audio
inputs to outputs, HDMI and ARC settings and delay to
avoid audio/video synchronization issues.
4
5
6
7
1 HDMI Long Cable
Mode
In instances where the distance of the cable may be
effecting transmission quality, this setting toggles ON/
OFF to improve display quality and stability..
Click Unlock, enter password
123456
and follow the
on-screen instructions to activate HDMI Long Cable
Mode – reboot the matrix for the change to take effect.
NOTE: this setting is designed for assistance only if
slight cable distance excess may be an installation
factor, it is not intended to bypass cable distance lim-
itations. We recommend following cable distances as
stated in the Specifications section of this manual.
2 Unlock
Unlocks HDMI Long Cable Mode function - enter pass-
word
123456
and follow the on-screen instructions to
activate HDMI Long Cable Mode – reboot the matrix
for the change to take effect.
3 Factory Reset
Restores the matrix to its initial Default Setting as
shipped.
Reboot the matrix for this setting to take effect.
Warning: This action will erase all previously saved
data/settings – this cannot be undone.
4 Copy EDID Setting
Select I/O from dropdown to copy output ports 1~8
EDID to specific input ports 1~8
5 Copy EDID
Press to copy selected Output port EDID to selected
Input port.
1
2
3
4
5