manualshive.com logo in svg

Wyrestorm MX-0808-4K, Инструкция по эксплуатации, Страница: 4 / 26

Поделиться
Скачать
Wyrestorm MX-0808-4K Скачать руководство пользователя страница 4

4

Technical support: [email protected]     EMEA/ROW: +44 (0) 1793 230 343

SPECIFICA

TIONS

5.     Specification

I/O Connections

8 x HDMI IN

8 x HDMI OUT

1 x RS485

1 x RJ45

1 x RS232

8 x SPDIF OUT (coaxial)

8x SPDIF OUT (optical)

1 x IR EXT

1 x EDID DIP switch

Output Bandwidth Signalling Rate 10.2Gbps
Input video Signal 

1.2 volts p-p

Input DDC Signal

5 volts p-p (TTL)

Maximum Pixel Clock

297MHz

Video Impedence

100 Ω

Audio Impedence

75 Ω 

Power Supply

12V 5A DC (5.5mm)

Power Consumption

40W Max

BTU Rating

136.5

Video Format Supported

480i, 576i, 480p, 576p, 720p, 1080i, 1080p @ up to 60Hz, 3840 (UHD) and 4096 

(DCI) x 2160p @ 30Hz

Audio Format Supported

Multichannel audio - DTS-HD 5.1 / 7.1, Dolby HD 5.1 / 7.1

Output Video

HDMI 1.4 with HDCP + full 3D (up to 1080p) - frame packing (Blu-ray) & stereoscopic 

(satellite/cable)

Control Method

IR control

Front panel buttons

RS232

RS485

LAN

Operating Temperature

32°F to 113°F (0°C to 45°C) 

Operating Humidity Range

10% to 90%, non-condensing

ESD Protection

±8kV (air-gap discharge)  ±4kV (contact discharge)

Surge Protection

Voltage: ±1kV

Technical

Cable Type Range

Supported Video

HDMI 1.4

7m/23ft

3840 (UHD) and 4096 (DCI) x 2160p @ 30Hz with 24bit / 

4:4:4 chroma sub-sampling color palette 

15m/49ft

1080p @ 60Hz with 36bit Deep Color (including 3D)

Cable Specifications

NOTE: Cable types below are for reference only. This product is tested using WyreStorm HDMI cables - we recommend use of Wyre-

Storm cables for guaranteed quality and reliability of transmission when dealing with UHD 4K content.

Ensure cables and connections are in good condition, with no bends or kinks and no patch panels or wall outlets used. 

The presence of any of these factors may compromise bandwidth and signal strength. 

        Please note cable type, 

range and supported video 

limitations.  Successful 

transmission may not be 

achievable with cable or 

distances other than those 

specified.

!

Содержание MX-0808-4K



























Отзывы:

Нет отзывов