2
Contents
Introduction
Features
Safety Precautions
WARNING
To reduce the risk of fire, electric shock
or product damage:
4
Technical Support: [email protected] US: +866 677 0053 EU: +44 (0) 1793 230 343
FEA
TU
R
E
S AN
D SAFETY PR
E
C
A
UTI
ON
S
MX0404-QI
• Quick and easy installation – set up in seconds straight out of
the box.
• Simplified ports - Input: HDMI – Output: integrated RJ45
connectors for a single Cat5e/6/7 UTP cable to each display
point for ease of installation.
• Conforms to IEEE-568B standards
• Each HDMI port also supports DVI signals.
• Each Output port can be fed to multiple displays (cascaded).
• Enables up to 4 HDMI video/audio devices to be independently
switched through up to 4 HDMI displays or projectors for
uncompressed digital distribution.
• Each output able to show any connected source simultaneously
regardless of whether the input carries HDCP encryption.
• Refined for Custom Install and Home Theatre Installations.
• Reads and copies EDID from connected devices with additional
EDID configuration through customisable DIP switch settings if
necessary.
• 2k resolution supported.
• Fully 3D compatible – Frame sequential 3D (Blu-ray) and
interlaced stereoscopic 3D (satellite broadcasts etc.)
• Supports all high definition resolutions up to and including
1080p and standard video formats.
• RS232 port.
• Choose from 6 switching modes – infrared remote control, front
panel buttons, local IR, IR call-back, LAN and RS232.
• Simple switching remote control included, which can also be
learned into a universal remote handset to allow the control of
multiple devices from one handset.
• Fully compatible for integration with market leading control systems.
• 4 x IR 3.5mm mini-jack ports for each output to link IR from
control system to control display
• Additional infrared extension port for longer IR connections
• HDMI v.1.3
• Supports 24Bit Colour depth
• Signalling rate of 6.75 Gbps
• Pack comes complete with 1 x 4x4 Matrix with 19” rack
brackets, 4 x 40m IR receivers with mounting brackets, IR
receivers, emitters and a Matrix remote control handset.
Additional features included on the RX-1UTP-IR-40
• Transmits one-way signal together with the HDMI signal over a
single Cat5e/6/7 cable.
• Receivers capable of 1080p transmissions up to 40m (131ft)
under ideal conditions*
• For even greater control and fine tuning, each receiver features
a fully adjustable EQ distance range for optimising the
transmission signal.
2. Features
3. Safety Precautions
1. Do not expose this apparatus to rain, moisture, sprays,
drips or splashes and ensure that no objects containing
liquids are placed on the apparatus, including cups,
glasses and vases.
2. Do not place this unit in a confined space such as
enclosed shelving, cabinets or bookshelves. Ensure the
unit is adequately ventilated.
3. To prevent the risk of electric shock or fire hazard due to
overheating, do not cover the unit or obstruct ventilation
openings with material, newspaper, cardboard or
anything that may restrict airflow into the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
produces heat such as amplifiers or computers and do
not place near sources of naked flame.
5. Unplug apparatus from power supply during lightening
storms or when unused for long periods of time.
6. Protect the power cable from being walked on, pinched
or restricted in any way, especially at plug connections.
7. Only use attachments/accessories specified by the
manufacturer.
8. Units contain non-servicable parts - Refer all servicing to
qualified service personnel.
WARNING
To reduce the risk of fire, electric shock
or product damage:
• Protection against ESD (electrostatic discharge) included within
the unit to further stabilise transmission.
• LED indications for clear power and video signal selection.
• 5v mains supply included but receivers may be powered through the
USB port of the display using Wyrestorm USB to 5v power adaptor)
• Fully cascadable to further lengthen transmission.
*NOTE: ideal conditions denote cable run is within
specified distance range of product, no electrical
interference, the use of straight cable runs with no bends
or kinks and no patch panels or wall outlets used. Please
be advised that the presence of any of these factors in
your installation may compromise bandwidth and signal
strength. For longer transmission distances, RS232 control
and Ethernet pass-through, please see our full HDBaseT
or HDBT Lite range of matrices, transmitters, receivers and
extender sets.
USB to 5V Cable
Part Number
CAB-USB-5V
Introduction
Features
Safety Precautions
Specification
Panel Description
i. Transmitter
ii. Receiver
Typical Application
Connection & Operation
EDID & Distance Setting
Troubleshooting
FAQ’s
Maintenance
Product Service
Mail In Service
Warranty
Warranty Limits and Exclusions
The WyreStorm Express™ EXP-EX-HDBT-50 extender
features Class B HDBaseT technology for an even more
affordable HDBaseT extender solution over shorter
distances up to 25m/82ft for 4K or 50m/164ft for 1080p
transmissions.
Designed for smaller projects that may not require the
feature set of full Class A HDBaseT yet still benefit from
the signal stability and functions offered by this powerful
technology, the EXP-EX-HDBT-50 extender comprises of
a transmitter and receiver to distribute full, uncompressed
HD and UHD video, HD multichannel audio with
bidirectional IR control over distances of up to 25m/82ft
for 4K or 50m/164ft for 1080p using a single shielded or
unshielded Cat5e/6 cable.
The EXP-EX-HDBT-50 transmitter includes EDID
management to manually handle device communication
via DIP switch setting, with receivers containing
cable distance setting mode to encourage successful
transmission if the distance of the cable run is an issue.
Both transmitters and receivers feature protection
against ESD (electrostatic discharge) to further stabilize
transmission with LED indication on the unit housing
providing clear confirmation of power and signal link
status.
The WyreStorm Express™ EXP-EX-HDBT-50 is also fully
cascadable with distribution increased by connecting
multiple extenders for greater flexibility, whatever the
application.
• HDBaseT single Cat5e/6 extenders capable of:
- 1080p HD @60Hz up to 50m/164ft
- UHD 4K @30Hz up to 25m/82ft
- HD multichannel audio
- Two-way IR control
• EDID Management - manually handles
communication between connected devices for
improved compatibility
• Supports 3D applications - frame packing/ sequential
(Blu-ray) and Interlaced Stereoscopic (satellite/cable)
broadcasts
• Supports 36bit Deep Color @1080p, 24bit True Color
@ 4K
• Cable termination follows IEEE-568B standards
• HDCP 2.2 compliant
• Automatically adjusts feedback, equalisation and
amplification of signal for easy installation.
• LED indication for visual power and HDMI / HDBaseT
video signal status.
1. Do not expose this apparatus to rain, moisture,
sprays, drips or splashes and ensure that no objects
containing liquids are placed on the apparatus,
including cups, glasses and vases.
2. Do not place this unit in a confined space such as
enclosed shelving, cabinets or bookshelves. Ensure
the unit is adequately ventilated.
3. To prevent the risk of electric shock or fire hazard
due to overheating, do not cover the unit or obstruct
ventilation openings with material, newspaper,
cardboard or anything that may restrict airflow into
the unit.
4. Do not install near external heat sources such as
radiators, heat registers, boilers or any device that
