Copyright © 2021 WyreStorm Technologies |
EX-100-H2-EARC Quickstart Guide | 210524
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
3 of 4
Troubleshooting
No or Poor Quality Picture (snow or noisy image)
• Verify that power is being supplied to the transmitter and receiver.
• Verify that the AVX cable is properly terminated following EIA568B standard.
• Verify that the output resolution of the source and display is supported by
this extender.
• If transmitting 4K, verify that the HDMI cables used are 4K rated.
• Verify that all source and AVX connections are not loose and are functioning
properly
No or Intermittent 3rd party Device Control
• Verify that the IR and RS-232 cables are properly terminated following the
• Verify that RS-232 modes are properly selected for the desired operation.
Refer to
Troubleshooting Tips:
• WyreStorm recommends using a cable tester or connecting the cable to
other devices to verify functionality.
Warranty Information
WyreStorm Technologies LLC warrants that its products to be free from defects in material and workmanship under normal use for a
period of five (5) years from the date of purchase. Refer to the Product Warranty page on
for more details on our limited
product warranty.
Dipswitch Settings
The dipswitches on the TX and RX allow for changing the audio
transmitting mode. Use the table to the right to configure the
extender’s audio mode based on the application’s requirement.
When setting a dipswitch setting, power off both the transmitter
and receiver before making a change. Once set, the units can be
powered back on.
Audio Formats
Function
Transmitter
Receiver
eARC (default)
ARC
S/PDIF Passthrough
TX De-embedding (via S/PDIF Out)
eARC
ARC
S/PDIF Port
HDMI Passthrough
PCM
✔
✔
✔
✔
PCM 5.1
✔
-
-
✔
PCM 7.1
✔
-
-
✔
Dolby Digital
✔
✔
✔
✔
Dolby Digital Plus
✔
✔
-
✔
Dolby TrueHD/Atmos
✔
-
-
✔
DTS
✔
✔
✔
✔
DTS HD
✔
✔
-
✔
DTS HD Master Audio
✔
-
-
✔
DTS:X
✔
-
-
✔
