WYLER BlueLEVEL-2D, Руководство пользователя, Страница: 7 / 65

page 7 of 65 pages
1 I
NTRODUCTION
1.1 D
ESCRIPTION OF
B
LUE
LEVEL-2D
The BlueLEVEL-2D is a high precision and compact inclination measuring instrument for 2 axes. In
spite of its small outer dimensions the instrument contains 2 inclination sensors one in X - and one in Y-
direction together with a full graphical and color 2D-display.
Thanks to its precision and its size the BlueLEVEL -2D is perfectly suited for the alignment of machines
and machine parts. It can be used as stand -alone unit but can also be used in combination with a
WYLER measuring software.
The Blue Level -2D is designed as a high-precision measuring instrument
The following parameters (among others) can be
set and changed at the BlueLEVEL-2D:

Units

Display of measuring range

Type of display

Filter settings
It is possible to send the measured data via an RS232 port to a PC/laptop and therewith to the WYLER
software LEVELSOFT PRO, MT -SOFT and LabEXCEL software.
The BlueLEVEL-2D contains two sensors based on the analog measuring principle . The analog
measuring principle is optimized for the measurement of straightness, flatness, etc. with handheld
instruments because this measurement principle provides a stable value very q uickly, which is very
important for precise measurements and an efficient measurement process. Furthermore it is very
insensitive to low-frequency interference, as can sometimes occur in machine tools.
1.2 P
REPARATION AND
S
TART
-
UP
P
RIOR TO STARTING
Please read this manual prior to working with the BlueLEVEL -2D. You will get an overview on all the
functions and possibilities of this instrument. At the same time you get familiar with the handling of the
instrument and wrong handling and specifically the un intentional erasing of the calibration data can
be avoided.
1.2.1
B
ATTERIES
The batteries are not inserted in the instrument during shipment. It is strongly recommended to remove
the batteries during transport.
The battery voltage is shown in the display e.g.
2
7
(2.7 Volt)
Lowest possible battery voltage is
1.7 Volt . If the voltage drops below this value a blinking battery
symbol is shown: The batteries should then be exchanged rather soon.
2 pieces
1.5V, Size “C” ALKALINE