WYLER BlueLEVEL-2D, Руководство пользователя, Страница: 21 / 65

page 21 of 65 pages
When measuring in the "relative mode" the height
"X" will be
displayed as linear measure in the selected unit and in
relation to the set base length (in
mm or inches ).
3.3
F
UNCTION
HOLD
The key function can be applied in all measuring modes.
Put the BlueLEVEL-2D on a stable support. Press now the key
. While the BlueLEVEL-2D is waiting for a valid
measuring value the display will show graphically t he
measuring values read in the form of a shoal of points. As it is
practically impossible to obtain a valid measuring value
during manipulation, the instrument can be set to the final
position even after activating the key.
Complete the measurement with the key or with
the zapper. After 15 seconds the measuring value will
automatically be read.
By pressing the key again a new valid
measuring value will be read.
With the key the "frozen" measuring value will
be transmitted via the "RS485" port to a connected PC/Laptop
with an RS232 interface. At the same time the instrument will
return to the measuring mode.
The function SEND can also be initiated from the PC/Laptop
connected by sending "P" (as a letter) via the RS 232 port.