![Würth 5709 300 100 Скачать руководство пользователя страница 14](http://html1.mh-extra.com/html/wurth-0/5709-300-100/5709-300-100_translation-of-the-original-operating-instructions_1001293014.webp)
14
Technical data
Prod. no.
5709 300 100
Laser type
635 nm
Laser classification
2 M
Number of laser crosses
4
Laser cross on ceiling
Downward laser point
Number of laser lines
5
Visibility
up to 22m (depending
on ambient light)
Beam pulsing for
operation with hand-held
receiver
up to 60m
Visual and acoustic alarm
if out of levelling range
Thread for tripods
5/8"-11
Power supply
NiMH batteries or
C batteries
Charging period
8-10 hours
Operating time of battery 10 to 40 hours de-
pending on how many
laser lines are active
Levelling range
± 3,5°
Levelling time
≤ 6 s
Accuracy
Horizontal and vertical
Accuracy
± 2.0mm to 10m
Laser cross on ceiling
± 2.0mm to 10m
Downward laser point
± 4,0mm to 10m
90° angle
± 30"
Charging the battery
Note
If the battery capacity below 15 %, the
operating indication illuminates in red
[10]
.
■
Charge the batteries
(charging socket
[2]
is on the bottom side).
Note
You can exchange the battery by
charged secondary cells or by primary
cells.
3
The indication
[10]
flashes in red during charg
-
ing.
3
If the battery is charged, the indication
[10]
illuminates in green.
Start-up
■
Protect the device against moisture and
direct sunlight.
■
Do not expose to extreme tempera-
tures or temperature changes.
E.g. do not leave it in a car for a longer period
of time. Before putting it in operation, allow the
device to acclimatise when it was exposed to
high temperature changes. Extreme temperatures
or temperature changes can impair the accuracy
of the device.
■
Protect the device against hard shocks
or drops
.
After heavy impacts check the device for ac-
curacy (see accuracy test on page 16) before
putting it in operation.
Switching on
■
Place the device on level ground.
■
Release the compensator using the On/Off
rotary knob
[1]
.
3
The device starts the levelling process automati-
cally. The downward plumb beam is visible and
the indicator
[10]
illuminates in green.
Note
The device is out of the levelling range, if
the indication
[7]
illuminates in red and
you hear an acoustic signal. If the laser
beams are switched on, they flash.
Содержание 5709 300 100
