Wurlitzer International L, Руководство по эксплуатации

Страница: 33 / 88

Operation with MDB
International L – edition: 17.02.2006
33
9.7 Test credit - service program 11
The IVC control unit is equipped with a test
credit button to facilitate test vends. When it
has been operated, the GREEN LED at the
control unit is on. Credits that are granted by
applying the credit button are not registered
in the operation counters.
Programming of the test credit:
Press key P - hold it - press button S seven times, display
shows
Press button 0, display shows
indicating that the current test credit comes to 0.20 EURO.
Change the test credit:
Press key P and keep it pushed. Display shows
Enter the desired new credit, e.g. 0.50 EURO, applying four
digits. Display shows
Release button P.
Finally leave the service program ( see page 20 ).
9.8 Number of coins to be accepted - service program 14
You can program the maximum number of coins to be accepted before a vend.
Programming:
Press key P - hold it - press key S four times, display shows
Press button 7 which shows the current number of coins
accepted, e.g.
Always one more coin than displayed will be accepted
(here 30 coins).
Change the number:
Press key P and hold it. Display is
Enter the desired number (e.g. 99) using two digits, display
shows
Any settings between 00 and 99 are possible. One more coin
than the number programmed will always be accepted.
Finally leave the service program ( see page 20 ).
Test
credit
11 COIN CHANNEL
SETTINGS
SELECTION:
10 =0020
SELECTION:
10 =
SELECTION:
=0050
14 CHANGER
OPTIONS
SELECTION:
07 = 29
SELECTION:
07 =
SELECTION:
= 99