The LCD display
International L – edition: 17.02.2006
50
NOTE: An erased character still appears in the cursor field. If erased in error, the charactercan be re-
inserted by applying key C. Any character that has been erroneously inserted, can be deleted by ap-
plying button 0.
A magnetic foil which shows the func-
tions of the buttons will help you to
programme (part no. 0050552).
All the buttons are furnished with an
„automatic repeat“ function. As long as
you keep pressing the button, the
function keeps running.
A character in the cursor field can be
programmed applying key C.
A new line can only be inserted if the
preceding (last) line has at least one
character.
The letters, characters, special signs
and place holders are shown in the
lefthand table. When you press button
9 (mode), the corresponding head character of each vertical column is displayed. The characters
listed under each heading can be called up by pressing button 2 (down) or button 1 (up). If you keep
either button 1 or 2 pressed, the function is automatically repeated.
How to enter blank characters:
Keep pressing button 9 (auto repeat) until an exclamation mark (!) is displayed in the cursor field.
First press button 1 and then key C.
Button 9
Moves the cursor to pre-determined positions within the character font, which
makes the programming and locating of any character easier. The following positi-
ons are defined:
0 = Numbers
A = Capital letters
a = Small letters
MA = Coin denominations
AW = Text attributes
K5 = Place holders
= Special characters
! = Special characters
Button 0
Erases the character on the left-hand side of the cursor. Should the cursor be situ-
ated at the beginning of a line, the character on the right-hand side of the cursor,
is erased. If a line has no characters on it, it is completely deleted. After this the
cursor jumps to the beginning of the line 1 of each message.
Button C
Inserts a character to the current text position or adds a character to an existing
text. At the same time the inserted character appears on the left side of the cursor.
So a continuous sentence is possible.
1
2
3
R
4
5
6
7
8
0
C
9
Tastenbelegung Editor alph. Anzeige
Key assignment display
Attribution touches / display
0050552
previous
line
cursor
position
previous
message
Mode
Ins
Del
R
next
message
cursor
position
next
line
