Wurlitzer International L Скачать руководство пользователя страница 20 | Manualshive

Страница: 20 / 88

Wurlitzer International L Скачать руководство пользователя страница 20

Programming of the machine

International L – edition: 17.02.2006

20

5.3

The service programs (overview)

ATTENTION!
Programs 11 to 17 should only be called up by those who have expert knowledge of the programs in-
volved or who have been properly trained to apply them. After any change in configuration, the ma-
chine does not revert to the previous mode of operation.

5.4

How to leave the service program:

Press key S until the display starts counting backwards (end of service program). The display will
show alternately "IN OPERATION" and "MACHINE ACCEPTS 0.05 - 2.00 EURO" or, in case the
change giver tubes are empty, "PLEASE INSERT EXACT MONEY" and "MACHINE ACCEPTS
0.05 - 0.50 EURO".

Second possibility:

Wait for some 60 seconds after that the machine automatically reverts to standard vending mode.

Section 1

Service programs 1 - 10

display of:

statistics

sales

machine tests

programming of:

vend prices

vend modes

selection options

To call up:

Press key S until the desired program is found.

If you wish to return to any previous service program, keep key P pressed and press key S, service programs
will run back wards.

Section 2

Service programs 11 - 17

programming of:

data transfer (only for NRI Simplex 0 or MDB)

coin options

change giver programming

maschine configuration

To call up:

!

Press key S until display shows 7.

!

Hold key P while pressing selection button 8 to display service program 11.

!

Press S to call up service programs 12 to 17.

OR:

!

You can take the steps in reverse order, too. Call up service program 17 by keeping key P down and by si-
multaneously pushing key S until you have the service program displayed.

«
...
18
19
20
21
22
...
»

Содержание International L

























































































Отзывы:

Нет отзывов