M A G M A
Chapter 4 Install 3rd Party PCI Cards
11
Slide the enclosure cover backwards,
disengaging it from the guides at the front of the
enclosure, by firmly grasping the rear cover lip
over the card IO area and pulling the cover
backward about ¼” and then lifting the cover off.
CAUTION
When replacing the enclosure cover, be sure that the front edge
guides on the cover engage the inner lip of the enclosure.
Install PCI Cards in PCI Expansion Chassis
CAUTION
When installing PCI cards or hard drives, please ensure that the input
current rating specified on the AC input label is not exceeded.
Slot ordering in the 4 Slot PCI Expansion chassis should begin with the
bottom slot – identified in this graphics as
.
Generally, when installing 3
rd
Party PCI cards in the Magma expansion
chassis, it should make no difference which PCI slot you place your
cards in, unless specified by the card manufacturer.
Install PCI cards following PCI card manufacturer’s recommendations.
Some PCI card manufacturers recommend that you install their software
driver(s) prior to installing the hardware. If this is the case, you should
install their driver before you connect and power up the expansion
chassis.
