3.Advanced Settings
3.1 Volume Setting
This intercom has 8 levels of volume available. Press VOL+/VOL- to set the volume.
3.2 Power ON/OFF
Press and hold the ON/OFF button for about 3 seconds to open/close the intercom. You can close it
when you don’t want to get any voice interference.
3.3 Channel & Code setting
This intercom is a real-time communication system. Please confirm that both stations are set to the same
channel and code to be able to communicate. After you connect to the AC power, you need to set the
channel & code for the intercom.
This intercom has 22 channels (01-22) and 100 codes (00-99) available(detail frequency data, please check
the table at 2.2 in this manual) .
1. Press “MENU button” , the channel number on the left side of the screen will flash. Press
CH+/ CH- / to set the channel;
2. Click the MENU button again, this will enable the code number on the right
of the screen to flash. Press CH+/ CH- / to set the code.
3. To complete the channel code setting, press MENU or TALK to exit editing.
The screen will stop flashing.
8 levels of volume available
TALK
Channel Number
Code Number
MENU
MENU
MENU
CH+ CH-
CH+ CH-
