Step 6:
Intercom A （Channel 03, Code 01）if Intercom
A hears the voice of the user of Intercom B, press and
hold TALK button to reply ”hello, testing one, two,
three” to test the voice connection of Intercom A;
Step 3:
Intercom A (Channel 03, Code 01）set the channel
number to”05” , then press the CALL button ；
2.4 Test Connecting
The steps for testing your connection are as follows:
2.5 Distribute Different Stations to Different Users
After testing, you can assign different intercom stations and “address list” to different users.
Step 1:
Separate intercoms at least 5 meters apart to prevent interference
Step 5:
Intercom B（Channel 05, Code 01）if ringing
was successful, press and hold the TALK button ,
and say the word “hello” to test the voice connection
of Intercom B. Release the TALK button after
speaking;
If you can hear audio on both ends of the intercom system using the steps above, you have successfully
set up all the units of your intercom system.
Step 2:
Set up each intercom to have the same code, but different channels. For this
test, Intercom A will have channel 03, code 01 while Intercom B will have channel 05,
code 01 . If you are testing multiple units, continue to program them to the same code
while assigning each intercom a different channel number (01-22).
Step 4:
Intercom B（Channel 05, Code 01）see if
Intercom B rings successfully;
Member A:
Channel 03 Code 01
Member B:
Channel 05 Code 01
TALK
TALK
TALK
CALL
