wtw pH 315i, Руководство по эксплуатации

Страница: 29 / 44

pH 315i Operation
29
4.4 Configuration
You can adapt the following setting to your individual requirements (the
default setting is marked in bold):
Display during the
pH calibration Buffer nominal value,
current electrode voltage
1 Switch off the measuring instrument.
2 Press the <M> key and hold it down.
3 Press the <ON/OFF> key.
Display test appears briefly on the display. Afterwards, the
measuring instrument switches automatically to the setting of
the display during the pH calibration.
4 Select the required display during the pH calibration with
<CAL>.
mV: Display of the current electrode voltage
/pH: Display of the buffer nominal value.
5 Confirm with <RUN/ENTER>.
The measuring instrument automatically switches to the mea-
suring mode.
RCL ARng
ConCal
Store Auto
0
No.
LoBat
Day.Month
Year Ident
UpH
AR
%
°F
°C
TP
mV/pH
mol/L
TempError CalError
Time Baud
1
S
mg/L
% ppm
ISE
L C A
p i s d
/pH
AutoCal DIN
AutoCal TEC