wtw Multi 3430, Руководство по эксплуатации

Страница: 13 / 102

Multi 3430 Overview
13 ba75865e02 12/2009
Sensor data from IDS
sensors
IDS sensors transmit the following sensor data to the meter:
z
SENSOR ID
– Sensor name
– Sensor series number
z
Calibration data
– Calibration date
– Calibration characteristics
– Calibration interval
– Selected buffer set (IDS pH sensors only)
– Cell constant (IDS conductivity sensors only)
– Calibration history of the last 10 calibrations
z
Measurement settings (IDS conductivity sensors only)
– The set measured parameter
– The set reference temperature
– The set temperature coefficient
– The set TDS factor
The calibration data are updated in the IDS sensor after each calibra-
tion procedure. A message is displayed while the data are being
updated in the sensor.
Note
In the measured value display, you can display the sensor name and
series number of the selected sensor with the [Info] softkey. You can
then display all further sensor data stored in the sensor with the [More]
softkey.