WTI RPC-4850-8, Руководство пользователя, Страница: 7 / 59

1-1
1. Introduction
Electronic equipment sometimes "locks-up," requiring a service call just to flip
the power switch to perform a simple reboot. The RPC-4850-8N Heavy Duty
Remote DC Power Controller gives you the ability to perform this function
from anywhere, just point your browser to the RPC’s IP address, enter the
secure password, and you’re just a click away from remote power and
reboot control!
Intelligent Power Control
In addition to web browser access, the RPC-4850-8N can also communicate
over any TCP/IP network using standard Telnet, or out-of-band using an
external modem and basic VT100 type terminal emulation.
Security Features and Co-Location Features
To ensure security, access to sensitive configuration and control functions is
protected by a user-defined password and user name. Passwords transmitted
via web browser use basic 64 bit encryption techniques to assure secure access
to your equipment.
The RPC provides two levels of operational passwords; the System
Administrator Level, which allows access to all configuration and switching
functions, and the User Level, which only allows access to assigned circuits
and cannot be used to change unit configuration.
In addition to password security features, the RPC also includes an address
specific IP security mask, which can be employed to prevent unauthorized
network access to the RPC command mode.
Easy to Configure, Easy to Use
The RPC can be configured over the network, via modem, or locally via the
RPC's Console Port. Simple, user-friendly commands let you assign a location
name, set system parameters and view circuit status. Circuits can be switched
On, Off, or booted using circuit numbers or names.
Reliability and Support
The RPC is built in the USA and backed by a two year warranty. NetReach
products are installed in thousands of network sites world wide. Our
customers know they can depend on WTI for superior quality and reliability
for their most mission-critical operations.