WTI RPC-4850-8, Руководство пользователя, Страница: 41 / 59

6-3
Operation
6.2. Operation via the Text Interface
When using the Text Interface, all switching functions are performed by
invoking simple, ASCII commands. ASCII commands are also used to display
status screens and to log out of command mode. The Text Interface includes a
Help Menu, which summarizes all available RPC commands. To display the
Text Interface Help Menu (Figure 6.3), type
/H
and press [Enter] .
6.2.1. The Circuit Status Screen - Text Interface
When you login to the RPC command mode using the Text Interface, the first
screen displayed after login is the Circuit Status Screen. The Circuit Status
Screen (Figure 6.2) lists the current status of the RPC’s Switched DC Circuits
and displays the firmware version and currently defined Site I.D. Message.
Normally, the Circuit Status Screen will also be redisplayed each time
a command is successfully executed. Note however, that if desired, the
Automated Mode (See Section 6.4) can be enabled to suppress the display of
the Circuit Status Screen after each command.
Remote Power Controller v1.41i Site ID: (undefined)
CKT | Name | Password | Status | Boot/Seq. Delay | Default |
-----+------------------+-------------+--------+-----------------+---------+
1 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
2 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
3 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
4 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
5 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
6 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
7 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
8 | (undefined) | (undefined) | ON | 0.5 Secs | ON |
-----+------------------+-------------+--------+-----------------+---------+
“/H” for help.
RPC>
Figure 6.2: Circuit Status Screen - Text Interface (Sample Values Shown)