ii
Warnings and Cautions
Two Power Supply Cables
Note that some NPS series units feature two separate power inlets and a separate
power supply cable for each power inlet. Make certain to disconnect all power supply
cables from their power source before attempting to service or remove the unit.
15 Amp Starter Cable(s)
Depending on your specific model, some NPS Series units may be shipped with either
one or two 125 VAC, 15 Amp "Starter" Cables. These Starter Cables will allow you to
connect the NPS to power for bench testing and initial start up and are adequate for
applications that only require 15 Amps. For 20-Amp power switching applications,
please refer to the WTI Power Cable guide supplied with the unit, or use appropriate
20-Amp cables.
