2-6
Unit Description
2.6. NPS-8HD Series - Back Panel
A1
A
B
A 2
A3
A4
B1
B2
B3
B4
ACT
A
B
ALARM
LINK
1 2
3
4
5
6
7
Figure 2.6: NPS-8HD Series - Back Panel
As shown in Figure 2.6, the NPS-8HD Series Back Panel includes the following
components:
Power Inlets:
Each inlet provides power to the four switched outlets on the corresponding branch.
1.
Branch A Power Inlet:
Supplies power to outlets A1 through A4.
• NPS-8HD20-1 Units: IEC 60320 C20 inlet, for 100/120V power.
• NPS-8HD20-2 Units: IEC 60320 C20 inlet, for 100/240V power.
• NPS-8HD16-3 Units: IEC 60320 C20 inlet, for 200/240V power.
2.
Branch B Power Inlet:
Supplies power to outlets B1 through B4.
• NPS-8HD20-1 Units: IEC 60320 C20 inlet, for 100/120V power.
• NPS-8HD20-2 Units: IEC 60320 C20 inlet, for 100/240V power.
• NPS-8HD16-3 Units: IEC 60320 C20 inlet, for 200/240V power.
3.
Cable Retainer Mounts:
Mounting Hardware for Cable Retainer Bracket.
Switched Power Outlets:
Eight switched power outlets, (four switched outlets per branch,) that draw power from
the corresponding branch power inlet.
4.
Branch A Switched Power Outlets:
Outlets A1 through A4 draw power from the
Branch A Power Inlet.
5.
Branch B Switched Power Outlets:
Outlets B1 through B4 draw power from the
Branch B Power Inlet.
• NPS-8HD20-1 Units: Eight NEMA 5-15R Outlets.
• NPS-8HD20-2 Units: Eight IEC 60320 C13 Outlets
• NPS-8HD16-3 Units: Eight IEC 60320 C13 Outlets
Alarm Indicators and Network Port:
6.
Alarm Indicator Lights:
Two LEDs which light when an alarm condition is detected
at the corresponding branch. For information on Alarm Configuration, please refer
to the WTI Firmware Guide.
7.
Network Port:
An RJ45 Ethernet port for connection to your 10/100/1000Base-T,
TCP/IP network. Note that the Network Port also includes two, small LED indicators
for Link and Data Activity. For more information on Network Port configuration,
please refer to the WTI Firmware Guide.
