WTI CMS-16 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 62

background image

currently connected to the CMS Network Port.

Mode: The user-selected Port Mode. This column will read Any (Any-to-Any), Modem,
Passive, or Buffer, depending on the configuration selected for the port.

●

Buffer Count: Lists the amount of data (in bytes) stored in the buffer for this port.

●

6.2. The Port Diagnostics Screen (/SD)

The Port Diagnostics Screen provides more detailed information about each port, including the
port name and communication parameters. To display the Port Diagnostics Screen, access the
command mode and type

/SD

[Enter], the screen will appear as shown in

Figure 6.2

.

Like the Port Status Screen, the Port Diagnostics Screen is also available to both Supervisors and
Users, and will appear slightly differently, depending upon whether the command mode was
accessed with the Supervisor Password or a Port Password (User Mode).

In User Mode, the Port Diagnostics Screen will display only the status of those ports that share
the same Port Password that was entered at login. Ports that are protected by other passwords
will not be displayed.

PORT DIAGNOSTICS: Version 1.02 Site ID: (undefined)

PORT | NAME | STATUS | BAUD | COM | HS | MODE | BUF | CTS

-----+------------------+--------+------+-----+-----+------+-----+-----

01+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | H

02+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

03+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

04+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

05+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

06+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

07+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

08+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

| | | | | | | |

09+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

10+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

11+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

12+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

13+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

14+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

15+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

16+ | (undefined) | *Free | 9600 | 8N1 | RTS | Any | 0 | L

Enter /H for Command Menu

Figure 6.2: The Port Diagnostics Screen (Defaults Shown)

As shown in

Figure 6.2

, the Port Diagnostics Screen lists the following items:

«
...
34
35
36
37
38
...
»

Содержание CMS-16































































Отзывы:

Нет отзывов

Похожие инструкции для CMS-16

xStack DGS-3612G series

Бренд: D-Link Страницы: 546

xStack DGS-3400 Series

Бренд: D-Link Страницы: 326

xStack DGS-3612G series

Бренд: D-Link Страницы: 493

xStack DGS-3400 Series

Бренд: D-Link Страницы: 540

DXS-3326GSR - xStack Switch - Stackable

Бренд: D-Link Страницы: 354

Бренд: NETGEAR Страницы: 15

Бренд: SIMON RWA Страницы: 3

Бренд: National Instruments Страницы: 23

Бренд: Metrix Страницы: 12

Бренд: Conceptronic Страницы: 7

Бренд: Dahua Страницы: 12

Бренд: UNIARCH Страницы: 6

Бренд: Hama Страницы: 14

Бренд: MicroNet Страницы: 74

Бренд: SmartThings Страницы: 2

Бренд: Rosewill Страницы: 9

3508-11 CenturySwitch

Бренд: METRObility Optical Systems Страницы: 20

Бренд: AAVARA Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды