WTI APS-16M, Руководство пользователя

Страница: 71 / 82

Apx-1
A. RS232 Port Interface
DCD and DTR hardware lines function as follows:
1. When connected:
a) If either port is set for Modem Mode, the DTR output at either port
reflects the DCD input at the other end.
b) If neither port is set for Modem Mode, DTR output is held high
(active).
2. When not connected:
a) If the port is set for Modem Mode, upon disconnect DTR output is
pulsed for 0.5 seconds and then held high.
b) If the port is
not
set for Modem Mode, DTR output is controlled
by the DTR Output option (Parameters Menu, Option 74). Upon
disconnect, Option 74 allows DTR output to be held low, held high,
or pulsed for 0.5 seconds and then held high.
Figure A.1: RS232 Port Hardware