WPI PV850, Инструкция по эксплуатации

Страница: 16 / 32

12 World Precision Instruments
Gross Adjustment
Fine Adjustment
Fig. 18—Touch the parameter in the center column of the screen that you want to adjust
and rotate the knob to modify the parameter. Press the knob to toggle between gross and
fine tuning adjustments, indicated by the running man and the snail on the screen.
4. Two seconds after a parameter is adjusted, it is saved into the memory. If you move from
on ara t r to t n t or t o s on s t rst ara t r s auto at a sa
into the memory as the working parameter. This setting will be recalled on power up.
NOTE s s ff r nt ro sa n ara t r s ts ( roto o s) to oa
5. Activate an injection using one of these methods. You will hear an audible alarm
when the injector port is activated.
• Press the foot switch.
• Press the Inject button on the touch screen controller.
• Send a TTL pulse from a pulse genertator. See “Connecting to a Pulse
Generator for TTL Control” on page 10.
Resetting the Injection Counter
This area in the left column shows the injection count. Whenever the foot switch is
depressed or the Inject button is pressed, the injection counter increments. Reset it to
zero by pressing the injection area of the main display touchscreen.
Fig. 19—Press Injections to reset the injection counter.