WPG P110C04DC, Руководство по эксплуатации

Страница: 9 / 36

Rev 29.0/11-19 P1-DC: #35111 7
1)
2A
Remove all restraints from the vacuum lifter and
save them with the shipping container for future
use.
2) Position the lift point as needed for the lifter's
intended use (fig. 2A): Loosen or remove the bolts
and move the lift point to create the best hang
angle. Then reinstall all hardware and tighten the
bolts securely.
3) Suspend the lifter from appropriate hoisting equipment:
3.1) Select a crane and/or hoist rated for the Maximum Load Capacity plus
the Lifter Weight.
Note: Any lifter use must comply with all statutory or regulatory standards
for hoisting equipment in your region.
3A 3B 3C
3.2)
3D 3E
Make sure
hook has
restraining latch
(circled).
Disengage the tilt
latch and raise the lift
bar (fig. 3A-C).
3.3) Attach the hoisting
hook to the lift point
(fig. 3D). Use rigging
(fig. 3E) as needed to
make sure the hook
does not interfere
with the load.
Only use rigging rated for Maximum Load Capacity
plus Lifter Weight.
ASSEMBLY